Noritake Super Porcelain EX-3 PRESS is a Pressable Ceramic System for porcelain alloys. The nano-technology by Noritake has been applied to the development of the material that produces bright and vivid colors. This EX-3 PRESS may be used from a single crown to a long span bridge and has an excellent durability. This system enables not only ceramists but also wax-up technicians to make highly esthetic restorations very easily.



■ Highly crack-resistant for wide range of alloys（Precious, Semi-precious and Non Precious alloys）
■ Easy handling and good bonding stength of EX-3 PRESS Paste Opaque
■ Easy producing of 360 degrees porcelain margin with an excellent fit
■ Beautiful and natural opalescence of EX-3 PRESS LF Luster Porcelains
■ The Internal Stain Technique is also available for EX-3 PRESS

Products

○ New Press Paste Opaque
○ High Translucency Ingot   20 Shades
○ Low Translucency Ingot   20Shades
○ New Bleaching Shade 『Esthetic White Ingot』 4shades available
○ New Extra Translucency Ingot 『ET0』 For inlay,onlay
○ EX-3 Press LF porcelain available: Body, Enamel, Silky Enamel, Translucent, Luster, CCV, Mamelon, Tissue
○ EX-3 Press LF Stain available: External Stain & Internal Stain
○ ACT Liquid prevents greening problem caused by silver containing alloys.
○ EX-3 Press DispoPlunger（2g/5g）

Alloy selection for EX-3PRESS

Our Recommendations

CTE = 13.8～14.2×10-6 K-1（25-500℃）
Less than 10% Silver（Ag）
Copper（Cu）free

Not Recommended

High noble alloys with gold colors
The alloys that will form a thick oxidation film

Press Ingot

EX-3PRESS Ingots（2g／5g）

High Translucency Ingot （H-Ingot） 20 shades for stain method

Low Transluceny Ingot （L-Ingot） 20 shades for layering method

Extra Translucency Ingot （ET0） 1 shades for inlay and onlay

Esthetic White Ingot （EW） 4 shades for bleaching shade

What's different 『EX-3 PRESS』 and 『CZR PRESS』

		EX-3 Press		CZR Press
With Frameworks	Material of Frameworks	"Metal frameworks" CTE = 13.8～14.2×10-6 K-1（25-500℃） Less than 10% Silver（Ag） Copper（Cu）free		"Pure zirconia frameworks" 3YTZP
	Stain Method	Possible	only EX-3 Press LF ES can be used.	Possible	CZR or CZR Press LF ES can be used.
	Layering Method	Possible	only EX-3 Press LF can be used.	Possible	CZR or CZR Press LF can be used.
Without Frameworks stand-alone	Stain Method	Possible	only EX-3 Press LF ES can be used.	Possible	CZR or CZR Press LF can be used.
	Layering Method	Impossible		Possible	only CZR Press LF can be used.